I have a bathroom 2.5m X 1.8m X 3.5m ceiling. On one wall at 2.4m off the ground there is approximately 0.9m X 0.4m ventilation frame, which is covered in metal mosquito mesh. There is a further 0.8 X 0.2m mesh lower down the same wall, obscured by wooden slats, and another on the side wall (both open to outside). There is a further mesh of 0.9m X 0.3m above the door to the rest of the house, which is opposite the 0.9x0.4m mesh
The outside weather is constantly 22-30C and the room will never be air conditioned.
Humidity is normally around 90% but ranges between 80 and 100%. There is very little natural breezes.
I have a 75 m^3/hour flow extractor fan which I can fit, but I'm not sure if it will do anything in that presumably the room is experiencing air changes already due to the meshed openings.
To be clear I'm not experiencing any particular issues that I want to address, but I'm demolishing part of the wall, so could install the fan, but do not have to.
Edit: added photo of top part of wall being rebuilt.
mesh currently removed.

