Possible Duplicate:
How to clean a clogged Misto oil sprayer/spritzer?
The pump on my Misto oil sprayer is locked in the down position. I cannot loosen it. I have soaked it in hot water. No luck. Any suggestions?
Asked
Active
Viewed 1,026 times
2 Answers
0
Theoretically, if the sprayer contains oil and it's blocked, then you need to dissolve the blocked oil with something in which oil dissolves. As most people know, oil does not dissolve in water. Soap works by being both hydrophilic ("likes water", ie water soluble) and hydrophobic ("dislikes water", ie oil soluble) and so can help dissolve oils in water.
If water and soap don't help, try something more radical such as alcohol, acetone or even paraffin (which will require a thorough cleansing afterwards!). Warming the pump whilst cleaning should also help slightly as this should increase the oil's solubility.
No'am Newman
- 938
- 6
- 11
0
Having encountered this myself (and it being my personal use Misto) I found the only way I was able to clear the pump was by forcing hot soapy water through from the bottom of the straw. I dealt with this a few times before concluding this:
- Button top aerosolizers (like the Misto) for thicker things like oil have the design flaw of not having a strong enough return to reset the pump
- Trigger style bottles on the other hand are both cheap enough you can recycle them if they start to fail and seem to offer more pressure on the oil.
JesseW
- 140
- 1
- 11