What is the dimensions of lego spike motor?

Question

Any Ideas on what is the dimensions of this motor, and the holes and space between them?

Do read https://bricks.stackexchange.com/q/288/13403 - all lengths can be derived from those. e.g. the diameter of a stud (or a technic hole) is 4.8mm, and the distance between studs is (or between technic holes) is 8mm. — IvanSanchez, Aug 28 '23 at 12:35

LKBricks · Answer 1 · 2023-09-06T04:08:33.867

-1

SPIKE M: 2.38 x 3.7 x 7.88 cm

SPIKE L: 8 x 4 x 4 cm

edited Sep 06 '23 at 04:08

answered Aug 27 '23 at 00:22

LKBricks

Thanks,what are the diameter of the holes and space between them? – AbdElhaleem Aug 28 '23 at 08:07
@AbdElhaleem, well dimensions are there, so it is easy to do the math if you have any LEGO bricks on hand. Diameter - one stud. Distance - 2 bricks (center to center), 3 bricks (edge to edge). – Alex Aug 28 '23 at 10:51
ok, i used BL studio for later for correct dimetions – LKBricks Aug 28 '23 at 11:07
What does Spike L motor has to do with regards to OP's question? The M motor is clearly higher than 3 studs - rotating part is not part of motor's dimensions? – Alex Aug 28 '23 at 15:17
the rotating part is one stud height. – LKBricks Aug 29 '23 at 05:43
The rotating piece is still part of a motor and its dimensions, right? – Alex Aug 29 '23 at 05:50
yep. i do a quick update to this answer :) – LKBricks Aug 29 '23 at 08:32
Well, I don't have any parts in hands, so I need to know the dimensions in mm, sorry for asking a lot – AbdElhaleem Aug 30 '23 at 12:47
OK, 8 mm is 1 stud. – LKBricks Aug 31 '23 at 23:29
Did you measure your own motors to get these values? Or did you find them somewhere? – zovits Sep 06 '23 at 06:20
I used BrickLink.com – LKBricks Sep 06 '23 at 07:15
There is a place for improvement. Why are there two motos listed? Which one of them is on OP's picture? Why dimensions for each motor are provided in different units? – Alex Sep 07 '23 at 15:51

1 Answers1